February 15, 2024 – 10:00 a.m. CST
Probability of Detection: Research Advances for Continuous Signal-Responses
Christine Knott, Ph.D., Research Mathematician, U.S. Air Force Research Laboratory (AFRL/RXCA)
December 7, 2023
Using X-Rays to Visualize Multiphase Flows
Theodore (Ted) J. Heindel – Department of Mechanical Engineering, Director, Center for Multiphase Flow Research and Education (CoMFRE)
October 19, 2023
NASA’s Emerging Needs in NDE for Space Exploration
K. Elliott Cramer – NASA Langley Research Center
August 24, 2023
Artificial Intelligence and Machine Learning in NDT – A Perspective on Progress, Challenges and Future Directions
John C. Aldrin – Computational Tools
June 15, 2023
Calibrations and Calibration Certificates: How to Use Them
Professor Alessandro Ferrero – Dept. of Electronics, Information & Bioengineering, Polytechnic University of Milan, Italy
April 4, 2023
Shearography NDE
John Newman – Laser Technology Inc.
February 9, 2023
NASA’s Efforts to Improve Nondestructive Evaluation Methods for Additive Manufacturing and in Space Inspection
Eric Burke – Research & Development Physicist, NASA Langley Research Center
December 15, 2022
Structural Health Monitoring: Historical Development, Current Status, Research Needs
Charles R. (Chuck) Farrar, Ph.D., PE, The Engineering Institute, Los Alamos National Laboratory
October 6, 2022
Applications of Synthetic Aperture Radar Polarimetry for Nondestructive Evaluation (NDE)
Dr. Matthew Dvorsky, Postdoctoral Research Associate, CNDE, Iowa State University
August 25, 2022
Probability of Detection: Standard Methods and New Research
Christine Henry, Research Mathematician, U.S. Air Force Research Laboratory (AFRL/RXCA)
June 16, 2022
Ultrasound NDE Using Dispersion Compensated Guided Wave Measurements
Ron Roberts, Associate Professor, CNDE, Iowa State University
April 25, 2022
ABC’s of Nonlinear Resonance Ultrasound Spectroscopy: Alloys, Bones and Concrete are Just the Start
D. J. Barnard, Research Scientist, CNDE, Iowa State University
October 15, 2021
Eddy Current Nondestructive Evaluations
Jiming Song, Electrical and Computer Engineering Department, and Yuan Ji, Research Scientist, CNDE, Iowa State University
December 17, 2021
Fundamentals of Instrumentation and Measurement for NDE
Tayeb Al Qaseer, Electrical and Computer Engineering Department, CNDE, Iowa State University
October 15, 2021
Using Heat to See Into Structures: Thermography for Non-Destructive Evaluation
Stephen D. Holland, Aerospace Engineering Department, Iowa State University
August 13, 2021
Microwave and Millimeter Wave Evaluation of Layered Composite Structures
Reza Zoughi, Electrical & Computer Engineering Department, Director CNDE, Iowa State University
June 15, 2021
Principles of Additive Manufacturing and Their Impact on Possibilities of Quality Assurance
Pete Collins, Materials Science & Engineering Department, CNDE, Iowa State University