Peer Reviewed Archival Journal Publications – Center for Nondestructive Evaluation

2024

Liu, L. J.⁺, B. W. Li, H. T. Qin, and Q. Li*, “Uncertainty quantification utilizing similarity evaluation between 3D surface topography measurements”, Special Issue: Advances in Data Analytics for Manufacturing Quality Assurance, Mathematics (IF 2.592, Q1), 12(5):669(2024). https://doi.org/10.3390/math12050669

2023

Heindel, T.J., “X-ray Flow Visualization: Techniques and Applications,” Journal of Fluids Engineering, 146:1, Paper 010801, December 2023. [DOI: 10.1115/1.4064050].
Xia, Z., R. Huang, M. Lu, W. Yin, Thickness and permeability estimation of metallic plates by triple-frequency eddy-current testing with probe lift-off, IEEE Transactions on Instrumentation and Measurement, In Press, December 2023. [DOI: 10.1109/TIM.2023.3341117].
Xia, Z., T. Meng, R. Huang, A. Fletcher, Y. Shao, M. Lu, A. Peyton and W. Yin, Physics-guided Deep Learning for Plate Permeability Estimation with Single to Multiple Frequency Transformation of Eddy-current Testing, IEEE Transactions on Industrial Informatics, In Press, December 2023. [DOI: 10.1109/TII.2023.3342876].
Case, A., A. Barvincak and R. Zoughi, “Microwave Complex Permittivity of Yttria-Stabilized Zirconia,” IEEE Open Journal of Instrumentation & Measurement, vol. 2, pp. 1-5, November 2023 [DOI: 10.1109/OJIM.2023.3332398].
Huang, R., Z. Xia, M. Lu, Z. Zhang, Q. Lin and W. Yin, Model-based Cylinder Radius and Permeability Estimation Using Eddy Current Testing,
Measurement, vol. 220, p.113285, October 2023.
Zoughi, R., “Microwave Real-Time and High-Resolution Imaging System Development for NDT Applications – A Chronology,” Materials Evaluation, vol. 81, no. 9, pp. 24-31, September 2023.
Gurrala, A. Downs, L.J. Bond, and J.M. Song, “Modeling ultrasonic NDE benchmark problems using full-wave scattering models,” Journal of Nondestructive Evaluation, vol. 42, article 59, June 2023. https://doi.org/10.1007/s10921-023-00966-6.
Dvorsky, M., M.T. Al Qaseer and R. Zoughi, “Multimodal Solution for a Circular Waveguide Radiating into Multilayered Structures using the Axially-Symmetric TE and TM Modes,” IEEE Open Journal of Instrumentation & Measurement, vol. 2, pp. 1-13, May 2023, [DOI:10.1109/OJIM.2023.3280489].
Brinker, K. and R. Zoughi, “National Alliance for NDE Education and Workforce Development – Current Challenges and Potential Paths Forward – Panel Discussion Outcomes,” Materials Evaluation, vol. 81, no. 4, pp. 26-33, April 2023.
Ahmadi, F., M.T. Al Qaseer and R. Zoughi, “Millimeter-Wave Near-Field Evaluations of Polylactic Acid (PLA) Filament Used in Polymer-Based Additive Manufacturing (AM),” Research in Nondestructive Evaluation (RNDE), pp. 1-16, February 2023, [DOI: 10.1080/09349847.2023.2189761].
Case, A., M.T. Al Qaseer and R. Zoughi, “Millimeter Wave Thickness Evaluation of Thermal Barrier Coatings (TBCs) Using Open-Ended Waveguide Probes,” Research in Nondestructive Evaluation (RNDE), pp. 1-17, February 2023, [DOI: 10.1080/09349847.2023.2180122].
Brinker, K. and R. Zoughi, “Tunable Chipless RFID Pressure Sensor Utilizing Additive Manufacturing – Model, Simulation, and Measurement,” IEEE Transactions on Instrumentation and Measurement, vol. 2, pp. 1-12, January 2023 [DOI: 10.1109/TIM.2023.3236307]

2022

Brinker, K. and R. Zoughi, “Local Sensitivity Analysis and Monte Carlo Simulation to Examine the Effects of Chipless RFID Measurement Uncertainties – Part II: Consideration of Multiple Measurement Uncertainties,” IEEE Open Journal of Instrumentation & Measurement, vol. 1, pp. 1-11, November 2022 [DOI: 10.1109/OJIM.2022.3221330].
Brinker, K. and R. Zoughi, “Local Sensitivity Analysis and Monte Carlo Simulation to Examine the Effects of Chipless RFID Measurement Uncertainties – Part I: Misalignment-Based Uncertainty,” IEEE Open Journal of Instrumentation & Measurement, vol. 1, pp. 1-12, October 2022 [DOI: 10.1109/OJIM.2022.3217860].
Bao, M. Xu, J. Qiu, and J.M. Song, “Efficient Model Assisted Probability of Detection Estimations in Eddy Current NDT with ACA-SVD Based Forward Solver,” Sensors, vol. 22, no. 19, article 7625, 2022. https://doi.org/10.3390/s22197625
Brinker, K. and R. Zoughi, “A Review of Chipless RFID Measurement Methods, Response Detection, and Decoding Techniques,” IEEE Open Journal of Instrumentation & Measurement, vol. 71, pp. 1-9, August 2022 [DOI: 10.1109/OJIM.2022.3196746].
Dvorsky, M., D. Munalli, M.T. Al Qaseer and R. Zoughi, “Application of Microwave Polarimetry to Characterization of Fiber Misalignment in Composites,” IEEE Open Journal of Instrumentation & Measurement, vol. 1, pp. 1-9, June 2022. [DOI: 10.1109/OJIM.2022.3184347].
G Gao, Y., M. Mahmoodi and R. Zoughi, “Design of a Novel Frequency-Coded Chipless RFID Tag,” IEEE Open Journal of Instrumentation & Measurement, vol. 1, pp. 1-9, 2022, [DOI: 1109/OJIM.2022.3175249].
Munalli, D., M.T. Al Qaseer and R. Zoughi, “Modified Waveguide-Based Method for Microwave Characterization of High-Loss Materials,” IEEE Transactions on Instrumentation and Measurement, vol. 71, p. 1-10, 2022, [DOI: 1109/TIM.2022.3156986].
Dvorsky, M, M.T. Al Qaseer and R. Zoughi, “Synthetic Aperture Radar 3D Polarimetry,” IEEE Transactions on Instrumentation and Measurement. vol. 71, pp. 1-12, 2022, [DOI: 1109/TIM.2022.3146937].
Bao, Y, W. Liu, J.R. Bowler, and J.M. Song, “Nested Kernel Degeneration-Based Boundary Element Method Solver for Rapid Computation of Eddy Current Signals,” NDT&E International, vol. 128, pp. 1-9, 2022. https://doi.org/10.1016/j.ndteint.2022.102633.
Bao, Y, Z.W. Liu, and J.M. Song, “Rapid Electromagnetic Modeling and Simulation of Eddy Current NDE by MLKD-ACA Algorithm with Integral Kernel Truncations,” Symmetry, 14, article 712, 2022. https://www.mdpi.com/2073-8994/14/4/712.
Bao, Y and J.M. Song, “Multilevel Kernel Degeneration-Adaptive Cross Approximation Method to Analyze Eddy Current NDE Problems,” Journal of Nondestructive Evaluation, 41, article 17, January 2022. https://doi.org/10.1007/s10921-022-00849-2.
Ning Pei, Bin Zhao, Leonard J.Bond, Chunguang Xu (2022) “Analysis of the Directivity of Longitudinal Waves Based on Double-Fold Coil Phased EMAT” Ultrasonics; volume 125, September 2022, 106788 — https://doi.org/10.1016/j.ultras.2022.106788 (already published online)
Pei, N., Shang, J., Bond, L.J. and Xu, X. (2022) Investigation of the Influence of Multi-Walled Carbon Nanotubes on Laminate Composites During Progressive Tensile Damage Using Acoustic Emission Journal of Nondestructive Evaluation, 41 (1) pp 1-5
Mahmoodi, M. T. Al Qaseer and K. M. Donnell, “Adjustable Resolution for Localized FSS-Based Sensing by Synthetic Beamforming,” IEEE Transactions on Instrumentation and Measurement, 2022, doi: 10.1109/TIM.2022.3151151.
Quintana, M. J., Y. Ji, and P. C. Collins. “A Perspective of The Needs and Opportunities for Coupling Materials Science and Nondestructive Evaluation for Metals-Based Additive Manufacturing.” Materials Evaluation 80, no. 4 (2022).
Shen, Y. Cao, X. Jiang, Z. Zhang, G. Kremer, H. Qin, “Experimental and Numerical Investigation on Origami-inspired Rigid Tubular Structure under Lateral Loading for Pipeline Rehabilitation”, J. Applied Mechanics 89(3): 031001 (2022). https://doi.org/10.1115/1.4052799
Do-Kyung Pyun, Lucas W. Koester, Daniel J. Barnard & Leonard J. Bond 2022. “Nonlinear Ultrasonic Inspection of the Effect of Contaminants on Material Properties of Epoxy-Adhesive” Journal of Nondestructive Evaluation volume 41, Article number: 75
Pei, Ning; Bond, Leonard; Wu, Qi (2022) “Analysis of Titanium Alloy pyramidal lattice core sandwich panels under bending load using acoustic emission” Applied Physics Express, 15 (7) 076508
Pyun, Do-Kyung, Daniel Barnard, and Leonard Bond. “Novel Characterization of Micro-scale Anomalies in Adhesively Jointed Structures.” Annual Conference of the PHM Society. Vol. 14. No. 1. 2022.
DK Pyun, LW Koester, DJ Barnard, LJ Bond 2022, Nonlinear ultrasonic inspection of cohesive failure in adhesive due to contaminants in the manufacturing process Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XVI, SPIE Vol 12047, pp 75-82
N Pei, J Shang, LJ Bond, C Xu, 2022. “Investigation of the Influence of Multi-Walled Carbon Nanotubes on Laminate Composites During Progressive Tensile Damage Using Acoustic Emission” Journal of Nondestructive Evaluation 41 (1), 1-5

2021

Anjana Deva Prasad, Aditya Balu, Harshil Shah, Soumik Sarkar, Chinmay Hegde, Adarsh Krishnamurthy; NURBS-Diff: A differentiable programming module for NURBS, Computer Aided Design, 146(103199), 2021.
Liu, C. and R. Zoughi, “Adaptive Synthetic Aperture Radar (SAR) Imaging for Optimal Cross-Range Resolution and Image Quality in NDE Applications,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-11, 2021, [DOI: 10.1109/TIM.2021.3118080].
Liu, C, M.T. Al Qaseer and R. Zoughi, “Permittivity Extraction from Synthetic Aperture Radar (SAR) Images of Multilayered Media,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-11, 2021, [DOI: 10.1109/TIM.2021.3113118].
Dvorsky, M., M.T. Al Qaseer and R. Zoughi, “Calibration of a Dual-Polarized Probe Using the 16-Term Calibration Model,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-11, 2021, [DOI: 1109/TIM.2021.3076854].
Liu, C., M.T. Al Qaseer and R. Zoughi, “Influence of Antenna Pattern on Synthetic Aperture Radar Image Sidelobe Level in NDE Applications,” IEEE Transactions on Instrumentation and Measurement, 70, pp. 1-6, 2021, [DOI: 10.1109/TIM.2021.3062193].
Brinker, K. and R. Zoughi, “Corner Reflector Based Misalignment-Tolerant Chipless RFID Tag Design Methodology,” IEEE Journal of Radio Frequency Identification (RFID), 5, no. 1, pp. 94-105, March 2021.
Liu, C., M.T. Al Qaseer and R. Zoughi, “Influence of Antenna Pattern on Synthetic Aperture Radar Resolution for NDE Applications,” IEEE Transactions on Instrumentation and Measurement, 70, p. 1-11, 2021, [DOI: 10.1109/TIM.2020.3026122].
Bao, Y, Z.W. Liu, and J.M. Song, “Hybrid method of ACA and interpolation-based algorithms for analysis of eddy current nondestructive evaluations,” Research in Nondestructive Evaluation (RNDE), vol. 32, no. 6, pp. 263-275, December 2021. https://doi.org/10.1080/09349847.2021.1991063.
Bao, Y, T. Wan, Z.W. Liu, J.R. Bowler, and J.M. Song, “Integral equation fast solver with truncated and degenerated kernel for computing flaw signals in eddy current non-destructive testing,” NDT&E International, vol. 124, pp. 1-13, 2021. https://doi.org/10.1016/j.ndteint.2021.102544.
Bao, Y, P. Gurrala, and J.M. Song, “Element discretization effects on boundary element method modeling for eddy current nondestructive evaluation problems,” Journal of Nondestructive Evaluation, 40, article 79, September 2021. https://doi.org/10.1007/s10921-021-00812-7.
Downs, A, R. Roberts, and J.M. Song, “Array based guided wave source location using dispersion compensation,” ASME J. Nondestructive, Diagnostics, and Prognostics Engr., vol. 113, pp.1-9, 2021. https://doi.org/10.1115/1.4050707.
Pei, N., Shang, S., and Bond, L.J. (2021) Analysis of Progressive Tensile Damage of Multi-walled Carbon Nanotube Reinforced Carbon Fiber Composites by Using Acoustic Emission and Micro-CT Journal of Nondestructive Evaluation 40 (2): 1-13
Pei, N., Zhao, B., Zhao, X., Liu, Z. and Bond L.J. (2021) Analysis of the directivity of Longitudinal Critically Refracted (LCR) waves Ultrasonics 113 article # 106359 https://www.sciencedirect.com/science/article/pii/S0041624X2100007X

Poonthottathil, N., Krennrich, Weinstein, A., Jonathan Eisch, J., Bond, L.J., Barnard, D., Zhang, Z., and Koester L. (2021) Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems Vol 4 (2) 024501 https://doi.org/10.1115/1.4049300
Manzoor, M. T. Al Qaseer and K. M. Donnell, “A Comprehensive Bi-Static Amplitude Compensated Range Migration Algorithm (AC-RMA),” IEEE Transactions on Image Processing, vol. 30, pp. 7038-7049, 2021.
Mirala, M. T. Al Qaseer and K. M. Donnell, “Health Monitoring of RAM-Coated Structures by Active Microwave Thermography,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-11, 2021.
Manzoor, M.T. Al Qaseer, K.M. Donnell, “Improved grounded coplanar waveguide‐to‐multilayer substrate integrated waveguide transition for efficient feeding of an antipodal Vivaldi antenna for imaging applications.” Microw Opt Technol Lett. 2021
Xingxing Zou, Ali Mirala, Lesley H. Sneed, M. T. Al Qaseer, K. Donnell, “Detection of CFRP-concrete interfacial debonding using active microwave thermography,” Composite Structures, vol. 260, 2021.
Quintana, Maria J., Matthew J. Kenney, Priyanka Agrawal, and Peter C. Collins. “Correction to: Texture Analysis of Additively Manufactured Ti-6Al-4V Deposited Using Different Scanning Strategies.” Metallurgical and Materials Transactions A 52, no. 1 (2021): 438-438.
J. Kenney, K. O’Donnell, M.J. Quintana, P.C. Collins, “Spherical pores as ‘microstructural informants’: understanding compositional, thermal, and mechanical gyrations in additively manufactured Ti-6Al-4V”, Scripta Materialia 198 (2021): 113827.
J. Quintana, A.J. Temple, P.C. Collins, “On the prediction of uniaxial tensile behavior beyond the yield point of additively manufactured Ti-6Al-4V”, editing for a resubmission.
Collins, Peter C., and D. Gary Harlow. “Probability and Statistical Modeling: Ti-6Al-4V Produced via Directed Energy Deposition.” Journal of Materials Engineering and Performance 30, no. 9 (2021): 6905-6912.
J. Quintana, K. O’Donnell, M.J. Kenney, P.C. Collins, “Differences in defect distribution across scan strategies in electron beam additively manufactured Ti-6Al-4V”, Advanced Materials and Processes (AM&P), July/Aug 2021, p 20-24
Ryan DeMott,*, Nima Haghdadi, Charlie Kong, Ziba Gandomkar, Matthew Kenney, Peter Collins, Sophie Primig, “3D Electron backscatter diffraction characterization of fine α titanium microstructures: collection, reconstruction, and analysis methods”, Ultramicroscopy (2021): 113394.
Jiang, Y. Q., Wang, S. D., Qin, H. T., Li, B. W., and Li, Q.* (2021). Similarity quantification of 3D surface topography measurements, Measurement,
Wang, S. D., Zhang, X., Zheng, Y., Li, B. W., Qin, H., and Li, Q.* (2021). Similarity evaluation of 3D surface topography measurements, Measurement Science and Technology, 32:125003
Zhang, X., Shen, W. J., Suresh, V., Hamilton, J., Yeh, L. H., Jiang, X. P., Zhang, Z., Li, Q., Li, B. W., Rivero, I. V., and Qin, H. T. (2021). In-situ monitoring of direct energy deposition via structured light system and its application in remanufacturing, The International Journal of Advanced Manufacturing Technology, 116: 959–974.
Zhang, W. Shen, V. Suresh, J. Hamilton, L-H Yeh, X. Jiang, Z. Zhang, Q. Li, B. Li, I. V. Rivero, H. Qin, “In-situ Monitoring of Direct Energy Deposition via Structured Light System and its Application in Remanufacturing Industry”, The International Journal of Advanced Manufacturing Technology volume 116, 959–974 (2021). https://doi.org/10.1007/s00170-021-07495-4
Poonthottathil, F.Krennrich, A. Weinstein, J. Eisch, L. J. Bond, D. Barnard, Z. Zhang, L. W. Koester, “Inspection of Electronics Components for Cryogenic Temperature Operations” Journal of Nondestructive Evaluation Diagnostics and Prognostics of Engineering Systems 4(2):1-5 DOI:10.1115/1.4049300 (2021)
Jiang, L. Yu, P. Premaratne, Z. Zhang, H. Qin, “CFD-based numerical modeling to predict the dimensions of printed droplets in electrohydrodynamic inkjet printing”, Journal of Manufacturing Processes, 66(12):125-132. (2021) https://doi.org/10.1016/j.jmapro.2021.04.003
Jiang, Y. Huang, X. Shi, Z. Zhang, H. Qin, “Effects of Lyophilization on the Release Profiles of 3D Printed Delivery Systems Fabricated with Carboxymethyl Cellulose Hydrogel”, Polymers 13 (5):749 (2021) https://doi.org/10.3390/polym13050749
Zhang, X. Jiang, Z. Zhang, and H. Qin, “Fabrication of silver microstructures via electrohydrodynamic inkjet printing as customizable X-ray marker in bio-structure for biomedical diagnostic imaging”, The International Journal of Advanced Manufacturing Technology. 114:241–250 (2021) https://doi.org/10.1007/s00170-021-06858-1
Aditya Balu, Sambit Ghadai, Onur Bingol, Adarsh Krishnamurthy; HyBODT: Hybrid bounded distance transform of trimmed NURBS models, Journal of Computing and Information Science in Engineering, JCISE-21-1290:1–11, 2021.
Harshil Shah, Xin Huang, Onur Bingol, Manoj Rajanna, Adarsh Krishnamurthy; GPU-accelerated post-processing and animated volume rendering of isogeometric analysis results, Computer-Aided Design and Applications, 19(4):779–796, 2021.
Jaydeep Rade, Aditya Balu, Ethan Herron, Jay Pathak, Rishikesh Ranade, Soumik Sarkar, Adarsh Krishnamurthy; Algorithm consistent deep learning for structural topology optimization, Engineering Applications of Artificial Intelligence, 106(104483):1–19, 2021.
Sambit Ghadai, Xian Lee, Aditya Balu, Soumik Sarkar, Adarsh Krishnamurthy; Multi-resolution 3D CNN for learning multi-scale spatial features in CAD models, 91(102038):1–13, 2021.
Subhrangsu Mukherjee, Jason K. Streit, Eliot H. Gann, Kumar Saurabh, Daniel F. Sunday, Adarsh Krishnamurthy, Baskar Ganapathysubramanian, Lee J. Richter, Richard A. Vaia, Dean M. DeLongchamp; Polarized X-ray scattering measures local chain orientation in polymer-grafted nanoparticles, Nature Communications, 12(1):1–10, 2021.
Prashant Singh, Rahul Singh, Aayush Sharma, Onur Bingol, Aditya Balu, Ganesh Balasubramanian, Adarsh Krishnamurthy, Soumik Sarkar, Duane D. Johnson; Neural-network model for force prediction in multi-principal-element alloys, Computational Materials Science, 198(110693):1–7, 2021.
Kumar Saurabh, Boshun Gao, Milinda Fernando, Songzhe Xu, Biswajit Khara, Makrand A. Khanwale, Ming-Chen Hsu, Adarsh Krishnamurthy, Hari Sundar, Baskar Ganapathysubramanian; Industrial scale large eddy simulations (LES) with adaptive octree meshes using immersogeometric analysis,Computers and Mathematics with Applications, 97:28–44, 2021.
Nathan Scheirer, Stephen Holland, Adarsh Krishnamurthy; Fiber layup generation on curved composite structures, Computer-Aided Design, 136:103031, 2021.
Sambit Ghadai, Anushrut Jignasu, Adarsh Krishnamurthy; Direct 3D printing of multilevel voxel models, Additive Manufacturing, 40, 2021.
Fei Xu, Emily L. Johnson, Chenglong Wang, Arian Jafari, Cheng-Hau Yang, Michael S. Sacks, Adarsh Krishnamurthy, Ming-Chen Hsu; Computational investigation of left ventricular hemodynamics following bioprosthetic aortic and mitral valve replacement, Mechanics Research Communications, 112(103604):1–12, 2020.

2020

Dvorsky, M., M.T. Al Qaseer and R. Zoughi, “Polarimetric Synthetic Aperture Radar Imaging with Radially-Polarized Antennas”, IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 12, pp. 9866-9879, December 2020.
Brinker, K., M. Dvorsky, M.T. Al Qaseer and R. Zoughi, “Review of Advances in Microwave and Millimeter-Wave NDT&E: Principles and Applications”, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, A 378: 20190585, p. 29, September 2020.
Dvorsky, M., M.T. Al Qaseer and R. Zoughi, “Detection and Orientation Estimation of Short Cracks Using Circularly-Polarized Microwave SAR Imaging”, IEEE Transactions on Instrumentation and Measurement. vol. 69, no. 9, pp. 7252-7263, September 2020.
Gao, Y., M.T. Al Qaseer and R. Zoughi, “Complex Permittivity Extraction from Synthetic Aperture Radar (SAR) Images”, IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 7, pp. 4919-4929, July 2020.
Brinker, K., M. Vaccaro and R. Zoughi, “Application-Adaptable Chipless RFID Tag: Design Methodology, Metrics, and Measurements”, IEEE Transactions on Instrumentation and Measurement, 69, no. 6, pp. 3882-3895, June 2020.
Brinker, K. and R. Zoughi, “Future Trends for I&M”, IEEE Instrumentation and Measurement Magazine, 23, no. 3, pp. 3-9, May 2020.
Wu, B., Y. Gao., J. Laviada, M.T. Ghasr and R. Zoughi, “Time-Reversal SAR Imaging for Nondestructive Testing of Circular and Cylindrical Multi-Layered Dielectric Structures”, IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 5, pp. 2057-2066, May 2020.
Gao, Y., M.T. Ghasr and R. Zoughi, “Effects of and Compensation for Translational Position Error in Microwave Synthetic Aperture Radar (SAR) Imaging Systems”, IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 4, pp. 1205-1212, April 2020.
Bao, Y and J.M. Song, “Analysis of electromagnetic NDE modelling using Stratton-Chu formulations based fast algorithm,” Philosophical Transactions of the Royal Society A, vol. 378, 20190583(15 pages), 2020. http://dx.doi.org/10.1098/rsta.2019.0583.
Bao, Y, W. Zheng, P. Gurrala, B. Xu, J.M. Song, and Y. Wu, “Electromagnetic radiation driven phase transition in telluride-iron oxide and iron telluride nano-composites,” ACES Journal, vol. 35, no. 4, pp. 424-429, 2020.
Norbert G Meyendorf, Peter Heilmann, Leonard J Bond (2020) NDE 4.0 in Manufacturing: Challenges and Opportunities for NDE in the 21st Century, Materials Evaluation 78: 794-803.
Mirala, A. Foudazi, M. T. Al Qaseer and K. M. Donnell, “Active Microwave Thermography to Detect and Locate Water Ingress,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 12, pp. 9774-9783, Dec. 2020.
Manzoor, M. T. Al Qaseer and K. M. Donnell, “Image Distortion Characterization due to Equivalent Monostatic Approximation in Near-Field Bistatic SAR Imaging,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 7, pp. 4898-4907, July 2020.
DeMott, P. Collins, C. Kong, X. Liao, S. Ringer, S. Primig. “3D electron backscatter diffraction study of α lath morphology in additively manufactured Ti-6Al-4V.” Ultramicroscopy, 2020, 218: 113073.
Y. Mendoza, M.J. Quintana, P.C. Collins, “Microstructure characterization and mechanical properties in individual zones of linear friction welded Ti-6Al-4V alloy”, Metallurgical and Materials Transactions A, 2020, https://doi.org/10.1007/s11661-020-06043-1.
J. Quintana, M. Kenney, P. Agrawal, P.C. Collins, “Texture analysis of additively manufactured Ti-6Al-4V deposited using different scanning strategies”, Metallurgical and Materials Transactions A, 2020, https://doi.org/10.1007/s11661-020-06040-4
Gong, Y.C. Yabansu, P. Collins, S.R. Kalidindi, “Evaluation of Ti-Mn alloys for additive manufacturing using high throughput experimental assays and Gaussian process regression”, Materials 13 (20) 4641
Stephen Holland, Chevonne McInnis, Rafael Radkowski, Adarsh Krishnamurthy; NDE data analysis and modeling in 3D CAD context, Materials Evaluation, 78(1), 2020.
Ramin Noruzi, Sambit Ghadai, Onur Bingol, Adarsh Krishnamurthy, Baskar Ganapathysubramanian; NURBS-based microstructure design for organic photovoltaics, Computer-Aided Design, 118, 2020.

2019

Horst, M., M.T. Ghasr and R. Zoughi, “Design of a Compact V-Band Transceiver and Antenna for Millimeter Wave Imaging Systems”, IEEE Transactions on Instrumentation and Measurement, vol. 68, no. 11, pp. 4400-4411, November 2019.
Gallion, J.R., A. Case and R. Zoughi “Millimeter Wave Detection of Surface Breaking Cracks in Steel and Aluminum under Sever Corrosion and Paint”, Materials Evaluation, vol. 77, no. 10, pp. 1245-1257, October 2019.
Zoughi, R., P.J. Arias-Monje, J. Gallion, S. Sarkar, P.H. Wang, P. Gulgunjie and S. Kumar, “Microwave Dielectric Properties and Targeted Heating of Polypropylene Nano-Composites Containing Carbon Nanotubes and Carbon Black”, Polymer, vol. 179, P. 1-7, September 28, 2019 (121658), [org/10.1016/j.polymer.2019.121658].
Gallion, J., A. Minachi, J. Correa, and R. Zoughi, “Microwave Detection of Metal Thinning on Steel Surfaces Covered by Sandy Oil Residues”, Materials Evaluation, vol. 77, no. 6, pp. 797-809, June 2019.
Horst, M.J., M.T. Ghasr and R. Zoughi, “A Compact Microwave Camera Based on Chaotic Excitation Synthetic Aperture Radar (CESAR)”, IEEE Transactions on Antennas and Propagation, vol. 67, no 6., pp. 4148-4161, June 2019. This paper received the 2020 H. A. Wheeler Applications Prize Paper Award of the IEEE Antennas and Propagation Society.
Laviada, J., B. Wu, M.T. Ghasr, and Reza Zoughi, “Nondestructive Evaluation of Microwave-Penetrable Pipes by Synthetic Aperture Imaging Enhanced by Full-Wave Field Propagation Model”, IEEE Transactions on Instrumentation and Measurement, vol. 68, no. 4, pp. 1112-1119, April 2019.
Gao, Y., M.T. Ghasr, M. Nacy and R. Zoughi, “Towards Accurate and Wideband In Vivo Measurement of Skin Dielectric Properties,” IEEE Transactions on Instrumentation and Measurement, vol. 68, no. 2, pp. 512-524, February 2019.
Horst, M.J., M.T. Ghasr, and R. Zoughi, “Effect of Instrument Frequency Uncertainty on Wideband Microwave Synthetic Aperture Radar (SAR) Images,” IEEE Transactions on Instrumentation and Measurement, vol. 68, no. 1, pp.151-159, January 2019.
Du, X, L. Leifsson, Meeker, P. Gurrala, J.M. Song, and R. Roberts, “Efficient model-assisted probability of detection and sensitivity analysis for ultrasonic testing simulations using stochastic metamodeling,” ASME J. Nondestructive, Diagnostics, and Prognostics Engr., vol. 2, no. 4, p. 041002 (13 pages), November 2019. https://doi.org/10.1115/1.4044446 (won 2019 Best Paper Award)
Bao, Y, Z.W. Liu, and J.M. Song, “MACA algorithm to accelerate modeling of eddy current position sensor,” ACES Journal, vol. 34, no. 8, pp. 1262-1265, August 2019.
Bao, Y, Z.W. Liu, J.R. Bowler, and J.M. Song, “Multilevel adaptive cross approximation for efficient modelling of 3D arbitrary shaped eddy current NDE problems,” NDT&E International, vol. 104, pp. 1-9, 2019.
Hossein Taheri, Margaret Kilpatrick, Matthew Norvalls, Warren J. Harper, Lucas W. Koester, Timothy Bigelow and Leonard J. Bond (2019) “Investigation of Nondestructive Testing Methods for Friction Stir Welding”, Metals 9(6), 624; https://doi.org/10.3390/met9060624
Taheri, H, Koester, L.W., Bigelow, T.A. Faierson, E. and Bond, L.J. (2019) In-situ process monitoring of additive manufacturing using clustering of spectral features for acoustic signals, Manufacturing Science and Engineering – Trans. ASME. 141 (4) 041011
Foudazi, C. Edwards, M.T. Ghasr, L. Sneed, and K. Donnell, “Active Microwave Thermography for Evaluation of FRP-Rehabilitated Cement-Based Structures.” Materials Evaluation, vol. 77, no. 6, June 2019.
Foudazi, A. Mirala, M. T. Ghasr and K. M. Donnell, “Active Microwave Thermography for Nondestructive Evaluation of Surface Cracks in Metal Structures,” IEEE Transactions on Instrumentation and Measurement, vol. 68, no. 2, pp. 576-585, Feb. 2019.
Mendoza, Michael Y., Peyman Samimi, David A. Brice, Iman Ghamarian, Matt Rolchigo, Richard LeSar, and Peter C. Collins. “On the role of composition and processing parameters on the microstructure evolution of Ti-xMo alloys.” BMC Chemistry 13, no. 1 (2019): 5.
Koester, Lucas W., Leonard J. Bond, Hossein Taheri, and Peter C. Collins. “Nondestructive evaluation of additively manufactured metallic parts: In situ and post deposition.” In Additive Manufacturing for the Aerospace Industry, pp. 401-417. Elsevier, 2019.
Martin, Brain W., Thomas K. Ales, Matthew R. Rolchigo, and Peter C. Collins. “Developing and applying ICME+ modeling tools to predict performance of additively manufactured aerospace parts.” In Additive Manufacturing for the Aerospace Industry, pp. 375-400. Elsevier, 2019.
Onur Rauf Bingol, Bryan Schiefelbein, Robert J Grandin, Stephen D Holland, Adarsh Krishnamurthy. An integrated framework for solid modeling and structural analysis of layered composites with defects. Computer-Aided Design (106), 2019 [DOI: 1016/j.cad.2018/07/006]
Lyu, X. Zhang, F. Liu, Y. Huang, Z. Zhang, S. Jiang, and H. Qin, “Fabrication of micro-scale radiation shielding structures using tungsten nanoink through electrohydrodynamic inkjet printing”, Journal of Micromechanics and Microengineering, 29 (2019): 115004. https://doi.org/10.1088/1361-6439/ab3b26
Aditya Balu, Sahiti Nallagonda, Fei Xu, Adarsh Krishnamurthy, Ming-Chen Hsu, Soumik Sarkar; A deep learning framework for design and analysis of surgical bioprosthetic heart valves, Scientific Reports, 9(18560), 2019.
Joshua Mineroff, Andrew McCulloch, David Krummen, Baskar Ganapathysubramanian, Adarsh Krishnamurthy; Optimization framework for patient-specific cardiac modeling, Cardiovascular Engineering and Technology, 10:553–567, 2019.
Arian Jafari, Edward Pszczolkowski, Adarsh Krishnamurthy; A framework for biomechanics simulations using four-chamber cardiac models, Journal of Biomechanics, 91:92–101, 2019.
Xiang Li, Adarsh Krishnamurthy, Iddo Hanniel, Sara McMains; Edge topology construction of Voronoi diagrams of spheres in non-general position, Computers & Graphics, 82:332–342, 2019.
Onur Bingol, Adarsh Krishnamurthy; NURBS-Python: An open-source object-oriented NURBS modeling framework in Python, SoftwareX, 9:85–94, 2019.