Conference Presentations – Center for Nondestructive Evaluation

2023

Zoughi, R., “Current Status and Challenges of NDE Education at Academic Institutions in the U.S.A.,” Presented at the European Conference on Nondestructive Testing (ECNDT), Academia NDT International Research Day, Lisbon, Portugal, July 3-7, 2023.
Case, A. and R. Zoughi, “Microwave Measurement of Layered Composites Using a Waveguide Iris” Proceedings of the American Society for Nondestructive Testing (ASNT) Research Symposium, pp. 281-284, Columbus, OH, June 26-30, 2023.
Ahmadi, F., M.T. Al Qaseer and Zoughi, “Millimeter Wave Near-Field Evaluation of Moisture Content of Polymeric Filaments Used in Additive Manufacturing,” Proceedings of the IEEE International Instrumentation and Measurement Technology Conference (I2MTC), p. 6, Kuala Lumpur, Malaysia, May 22-25, 2023.
Zoughi R. and P. Collins, “A Vision for Comprehensively Brining Additive Manufacturing (AM) and Nondestructive Evaluation (NDE) Together in a National Testbed,” Presented at the Nondestructive Evaluation of Advanced Manufacturing Technologies (AMT) Workshop, Hosted by the Nuclear Regulatory Commission (NRC), May 2-3, 2023.
Liu, L. J.⁺, S. Holland, A. Krishnamurthy, Q. Li, Z. Zhang, “Deforming CAD models to match as-built geometry to facilitate fusion of nondestructive evaluation data”, In the IISE Annual Conference, New Orleans, May 2023

2022

Donnell, K. and R. Zoughi, “Evolution of Nondestructive Evaluation (NDE) Course at Missouri University of Science and Technology (S&T),” Presented at the American Society for Nondestructive Testing (ASNT) Research Symposium, St. Louis, MO, June 20-23, 2022.
Zoughi, R., M.T. Al Qaseer, M. Abu Laila and M. Dvorsky, “Rapid Microwave Inspection of Heat Exchanger Tubes,” Presented at the American Society for Nondestructive Testing (ASNT) Research Symposium, pp. 166-169, St. Louis, MO, June 20-23, 2022.
Shen, W. J., L. J. Liu⁺, X. P. Jiang, Z. Zhang, Q. Li., H. T. Qin, “Multi-modal in-situ nondestructive testing of direct energy deposition and AI-enabled data fusion for quality assurance in remanufacturing”, In the IISE Annual Conference, Seattle, May 2022
Liu, L. J.⁺, W. J. Shen, X. P. Jiang, Q. Li, H. T. Qin, “Melt pool temperature prediction in additive manufacturing with the data-driven models”, In the IISE Annual Conference, Seattle, May 2022
Wang, S.D., Liu, L. J., Zhang, X., Zheng, Y., Li, B.W., and Qin, H.T. Li, Q.*, Similarity evaluation between 3D surface topography & measurement studies based on this evaluation in advanced manufacturing, IMSE Dept. Seminar, ISU, April 2022.

2021

Brinker, K. and R. Zoughi, “Characterization of Pressure Sensitive Substrates for the Development of Chipless RFID Pressure Sensors,” Presented at the 16th International Symposium for Nondestructive Characterization of Materials, Baltimore, MD, August 10-12, 2021 (virtual).
Filbert, J., M.T. Al Qaseer and R. Zoughi, “Microwave Material Characterization of Metal Powder used in Additive Manufacturing,” Presented at the 16th International Symposium for Nondestructive Characterization of Materials, Baltimore, MD, August 10-12, 2021 (virtual).
Dvorsky, M., D. Munalli, M.T. Al Qaseer and R. Zoughi, “Characterization of Fiber Waviness in Carbon Fiber Reinforced Composites Using Microwave Polarimetric SAR Imaging,” Presented at the 16th International Symposium for Nondestructive Characterization of Materials, Baltimore, MD, August 10-12, 2021 (virtual).
Mathews, T., J. Filbert, A. McCarville, M.T. Al Qaseer, and R. Zoughi “Characterization of the Complex Dielectric Properties of Martian and Lunar Regolith Simulants at Microwave Frequencies,” Presented at the 16th International Symposium for Nondestructive Characterization of Materials, Baltimore, MD, August 10-12, 2021 (virtual).
Case, A., M.T. Al Qaseer and R. Zoughi, “Constraints on the Electromagnetic Modelling of a Layered Structure for Microwave Thickness and Materials Characterization,” Presented at the American Society for Nondestructive (ASNT) Testing Spring Research Symposium, Westminster, CO, April 27-29, 2021 (virtual).
Case, A., Y.C. Liu, L. Leifsson, and R. Zoughi, “Sensitivity Analysis of Microwave Characterization of Multi-Layered Materials,” Presented at the American Society for Nondestructive (ASNT) Testing Spring Research Symposium, Westminster, CO, April 27-29, 2021 (virtual).
Liu, C., M.T. Al Qaseer and R. Zoughi, “Effect of Antenna Pattern on the Detection of Glass Fiber Reinforced Polymer (GFRP) Reinforcing Bars in Concrete Using Microwave Holographical Imaging,” Presented at the American Society for Nondestructive (ASNT) Testing Spring Research Symposium, Westminster, CO, April 27-29, 2021 (virtual).
Vaccaro, M., M.T. Al Qaseer and R. Zoughi, “Analysis and Practical Limitations of Altered Open-Ended Waveguide Flange Geometry for Microwave Materials Characterization of Layered Structures,” Presented at the American Society for Nondestructive (ASNT) Testing Spring Research Symposium, Westminster, CO, April 27-29, 2021 (virtual).
Liu, C., M.T. Al Qaseer, F.S. Bao and R. Zoughi, “Target Depth-based Adaptive Scanning in Microwave Synthetic Aperture Radar Imaging for NDE Applications,” Presented at the SPIE 2021 Conference, Passive and Active Millimeter-Wave Imaging XXIV, Westminster, CO, April 11-15, 2021 (virtual).
Liu, L. J., Li, B. W., Qin, H. T., and Li, Q.*, Quantifying different sources of variations by conducting measurement studies based on the similarity scores of surface topography data in a process, In the IISE Annual Conference, Virtual, May 2021
Jiang, Y. Q., Wang, S. D., Qin, H. T., Li, B. W., and Li, Q.*, Similarity evaluation of 3D surface topography measurements via Fourier transformation, In the IISE Annual Conference, Virtual, May 2021
Liu, L. J., Li, B. W., Qin, H. T., and Li, Q.*, Quantifying different sources of variations by conducting measurement studies based on the similarity scores of surface topography data in a process, In the IISE Annual Conference, Virtual, May 2021
Jiang, Y. Q., Wang, S. D., Qin, H. T., Li, B. W., and Li, Q.*, Similarity evaluation of 3D surface topography measurements via Fourier transformation, In the IISE Annual Conference, Virtual, May 2021

2020

Wang, S.D., Zhang, X., Zheng, Y., Li, B.W., and Qin, H.T. Li, Q.*, Similarity evaluation of 3D surface topography measurements in additive manufacturing, In Joint Statistical Meetings (JSM), Virtual, Aug 2020
Wang, S.D., Zhang, X., Zheng, Y., Li, B.W., and Qin, H.T. Li, Q.*, Similarity evaluation of 3D surface topography measurements in additive manufacturing, In the IISE Annual Conference, Virtual, May 2020
Wang, S.D., Zhang, X., Zheng, Y., Li, B.W., and Qin, H.T. Li, Q.*,Similarity evaluation of 3D surface topography measurements in additive manufacturing, In National Institute of Standards and Technology (NIST), Gaithersburg, MD, Feb 2020
Wang, S.D., Zhang, X., Zheng, Y., Li, B.W., and Qin, H.T. Li, Q.*, Similarity evaluation of 3D surface topography measurements in additive manufacturing, In Joint Statistical Meetings (JSM), Virtual, Aug 2020

2019

Brinker, K. and R. Zoughi, “Chipless RFID: Design Advances and Measurement Challenges in Identification and Sensing Applications,” Presented at the IEEE Wireless in Space and Extreme Environments Passive Wireless Sensor Technologies Workshop, Ottawa, Canada, October 16-18, 2019.
Dvorsky, M. and R. Zoughi, “Detection of Surface-Breaking Cracks in Metals Using a Radially-Polarized Microwave Probe,” Presented at the 46th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2019), Portland, OR, July 14-19, 2019 (https://www.iastatedigitalpress.com/qnde/article/id/8655/).
Ghasr, M.T., Y. Gao and R. Zoughi, “Handheld Microwave Imaging System for the Inspection of Non-Metallic Structures,” Presented at the 46th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2019), Portland, OR, July 14-19, 2019 (https://www.iastatedigitalpress.com/qnde/article/id/8625/).
Brinker, K. and R. Zoughi, “Microwave Measurement of Conductivity of Inkjet-Printed Wireless Passive Sensors for Structural Health Monitoring (SHM),” Presented at the American Society for Nondestructive Testing (ASNT) Spring Research Symposium, Garden Grove, CA, April 1-4, 2019.
Gallion, and R. Zoughi, “Millimeter Wave SAR Imaging for Detection of Surface Breaking Cracks in Metallic Structures under Heavy Corrosion and Paint,” Presented at the American Society for Nondestructive Testing (ASNT) Spring Research Symposium, Garden Grove, CA, April 1-4, 2019.
Dvorsky, M., M.T. Ghasr and R. Zoughi, “Microwave Detection of Surface Breaking Cracks in Metallic Structures Using a Radially Polarized Antenna,” Presented at the American Society for Nondestructive Testing (ASNT) Spring Research Symposium, Garden Grove, CA, April 1-4, 2019.
Case, A., M.T. Ghasr and R. Zoughi, “On the Millimeter Wave 3D SAR Imaging of Multi-Layer Composites Backed by Conductive Substrates,” Presented at the American Society for Nondestructive Testing (ASNT) Spring Research Symposium, Garden Grove, CA, April 1-4, 2019.
Zhan Zhang, Leonard J. Bond, A Review of Reconstruction Methods for Limited Angle X-Ray Tomography in Nondestructive Evaluation Applications, QNDE Conference 2019. Portland, OR, July 14-18, 2019
Mirala A., Bischof D., VanZant L., Ghasr M. T., Donnell K. M., Zou X. & Sneed L., (2019) “Defect propagation evaluation using active microwave thermography”, Review of Progress in Quantitative Nondestructive Evaluation 0(0)